Substrate Secrets: What, why and how do we measure substrate properties? Part 3

Alex Nevels

As I have said before, substrates harbor many secrets. Some are easy to discern; some are not. Critical properties should be measured and controlled to ensure accurate property levels are met or known. I will continue with what properties should be measured, along with a discussion on how to use the measurements.

Click the link below to download the full article.

This post is for members only

Subscribe

Already have an account? Log in

You might also like

Thermoforming as a design tool in printed-electronics applications Members Public

To date, the benefits of two-dimensional (2D) printed electronics have been widely realized when the printed flat components can be integrated into the target device without many design constraints. However, it often can be challenging to fit the printed 2D surfaces fully conformally onto complex surfaces of a 3D device,

Alex Nevels
Converting Quarterly

WEB COATING | Basic configurations for drying and curing of liquid coatings Members Public

Liquid coatings need to solidify before being wound into a roll. For ambient-temperature coatings, this requires drying, curing or a combination of the two. Here we discuss the basic configurations and the benefits and drawbacks of curing with and without drying. Click the link below to download the full article.

Alex Nevels
Converting Quarterly

Latest Articles

Achieving a true circular economy for plastic packaging

ECONOMIC FRONT | Stumbling into 2022: While growth slows, inflation keeps keepin’ on

CUT POINTS | What problems may be solved via electronic shear knifeholders?