Determination of Metal Adhesion Strength of Metallised Films by Peel Tests Paid Members Public
Presented by Esra Kucukpinar, Fraunhofer Institute for Precess Engineering and Packaging One major quality indicator of metallized films is the metal adhesion strength between the inorganic layer and the substrate. The weaknesses of ethylene-acrylic acid (EAA)-peel test for better adhering Aluminum layers are shown. A mechanically stronger film than
Real Time High Speed Non-contact Wet or Dry Thickness Measurement of Pressure Sensitive, Solvent Based, Laminating, Hot Melt and Other Adhesives on Multiple Substrates Paid Members Public
Presented by Vivek Komaragigi, Sensory Analytics Different types of adhesives are widely used in areas such as film packaging, laminating, paper and Kapton tapes and so on and conventional technologies used for measuring various applied adhesive coatings are either environmentally unfriendly or indirect coat weight measurement methods that rely on
Elastic Web Processing Lines: Optimal Master Roller Position Paid Members Public
Presented by D. Knittel, Institute of Physics and Engineering This paper concerns the tension control of roll-to-roll systems. In such systems, each driven roller speed is controlled separatly. The impact of the master roller position on tension control performances is studied using optimized web tension control synthesis. The tension disturbance
Roll-to-Roll Equipment for Atmospheric Atomic Layer Deposition for Solar Applications Paid Members Public
Presented by Raymond Knaapen, VDL Enabling Technologies Group Amongst thin-film deposition techniques, Atomic Layer Deposition (ALD) has unique properties like high conformality, high layer quality and thickness control down to Å level. Deposition rate, however, is very low in conventional ALD reactors. To achieve high throughput and to reduce costs,
Safety in Web Handling: Part 1 - Standards Paid Members Public
Presented by Clarence Klassen Web handling lines have multiple sources of energy and power. These sources may include thermal, radiation, hydraulic and pneumatic pressure, springs, gravity and rotational energy. We will discuss the safety aspects of rotational energy associated with drives in web handling. We will discuss how “safety drives”
Roll-to-Roll Sputtered ITO/Ag/ITO Multilayer Films for Flexible Organic Solar Cells and Flexible Heaters Paid Members Public
Presented by Han-Ki Kim, Department of Advanced Materials Engineering for Information and Electronics Indium tin oxide (ITO), Ag, and ITO layers were sputtered onto a flexible PET substrate with a 700 mm width by using a commercial roll-to-roll (RTR) sputtering system to use as a flexible and transparent anode for
Silver Nanowires/Graphene Oxide Hybrid Transparent Electrode Paid Members Public
Presented by Sunghoon Jung, Korea Intitute of Materials Science Transparent electrodes (TE) are essential for various opto-electronic devices such as touch sensing panels, organic light emitting diodes and thin film solar cells. Recently, flexible electronics has been paid attention for next generation electronic devices. There are rapidly increasing interests about
Modelling Bowing Distortion in Plastic Electronics Panels Paid Members Public
Presented by Dilwyn P. Jones, Emral Ltd.
