PVdC – Past and Current Barrier Material Paid Members Public
One of the ongoing challenges for today’s consumer goods and products is to provide packaging and protection with enhanced barrier to oxygen, various gasses, water and chemicals. Polyvinylidene di-chloride (PVdC) has been used for decades on paper and plastic films and as extrusion resin. This paper will focus more
A Flexible Active-matrix Electronic Paper Display Driven with Amorphous Oxide Semiconductor Paid Members Public
Presented by Manabu Ito, Toppan Printing Co., Ltd. We demonstate, for the first time, a flexible, active-marix, electronic paper display driven with amorphous oxide semiconductors. A tansparent and flexible backplane was deposited by standard sputtering technique at room temperature using amorphou In-Ga-Zn-O as an active channel, which is fully compatible
Aluminum Wire in Metallizing Paid Members Public
Presented by Kevin Hunter, Shaped Wire/Solon Specialty Wire Legget & Platt Inc. Aluminum Wire is one of the primary consumables in today’s vacuum metallizing industry for flexible packaging and other applications. Typically when problems are encountered, the aluminum is often overlooked based on the past history and experience
New Methods to Analyze the Steel to Rubber Roller Interface Paid Members Public
Presented by Stephen Huff, ABBA Rubber Intl. Common to most converting lines are nip rollers. These roller-to-roller interfaces perform many different tasks from conveying the web through the machine to performing complicated processing steps. Most of the knowledge base on nips comes from experience or “rule of thumb.” Data explaining
The Mechanical Properties of Metal Oxide Coated Polyester Films Paid Members Public
Presented by B.M. Henry, University of Oxford This communication reports on a study of the microstructure, mechanical and gas barrier properties of PECVD metal oxide coatings on heat stabilised (HS) PET [poly(ethylene terephthalate)],, primer-coated HS PET, filled PET and PEN [poly(ethylene naphthalate)] substrates. The coatings are highly
Contribution of Plasma in Vacuum Al Metallized Polyester Film Paid Members Public
Presented by B.N. Gupta, Polyplex Corporation Ltd. Different methods are available for surface preparation/treatment in polymeric film in converting industry, out of which, plasma surface treatment is rapidly gaining acceptance as a commercial tool for modifying the surface properties of polymer films for different conversion processes like metallizing,
Reducing Cost with Proper Slit Roll Handling Paid Members Public
Presented by Fred Gum, AET Films
Understand Laminate Slitting Paid Members Public
Presented by Dominique Gallou, Zincometal
